Hello. I was wondering what the exact meaning of this was. We are looking for an easy way to tell if a port has ever been used, and is available, or if the device plugged into the port simply isn't turned on.
The definition states the following: "Campus Manager generates report for administratively up ports, which are not connected to any device or end host after the last User Tracking Acquisition."
Does this mean that if the User Tracking Aquisition job runs (which it seems to do quite often), and the PC is off, it will consider the port Unused Up?
Correct. You can correlate that with the Recently Down report to see if the port had been recently up, but is now down.
The next release of Campus Manager will change these reports to provide a longer history of port state. That will mean that you will be able to go back, say, six months, and see if the port has been down for that time.
LMS 3.0 is a new major release, and there will not be upgrade part numbers from previous versions of LMS. You should contact your sales team for precise details, but it may be a few weeks before the SKUs are finalized.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...