is there a way to upgrade both, asa ios and pdm file, with Cisco Works?
I can't add the pdm file to the software repository.
If I try it with a NetConfig job, the job will fail with the message "Cause: connect timed out. Insufficient no. of interactive responses(or timeout) for command "copy tftp://IP/asdm-file.bin disk0:/asdm-file.bin<R><R><R>"
For the ADSM, you will need to use Netconfig. This functionality should work provided your job timeout is sufficiently high. Exactly what prompts do you get when executing this command manually on the ASA?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...