Trying to upgrade 3750 stack. Have had some problems uploading files but finally got the files up with archive tar /extract to flash:/. Are files replicated to other switch or what. Checking files with dir flash:/, if I run dir flash1:/, am I looking at the same files as in dir flash:/??
If I run dir flash2:/ then console hangs and I have to disconnect. I thougt maybe dir flash:/ shows me Master switch in stack and the number corresponds to the switch numbers I get when I run show switch??
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...