Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Upgrading NAM-1 from 3.4(1a-Patch-3) to 3.5.1

Hi,

Has anyone here had success loading 3.5.1 onto their NAM-1 ?

I am trying to upgrade from 3.5(1a-Patch-3).

The NAM-1 is time synched with the switch, but

even if I sync with ntp server it still does not work.

Here,

root@nam-1# show ver

NAM application image version: 3.4(1a-Patch-3)

Maintenance image version: 2.1(2)

BIOS Version: 4.0-Rel 6.0.9

Installed patches:

Wed Dec 28 11:48:30 2005 Patch: nam-app.3-4.strong-crypto-patchK9-1-0 Descriptio

n: Strong Crypto Patch for NAM.

Wed Dec 28 11:56:23 2005 Patch: nam-app-patch.3-4-1-0 Description: Patch 1 for N

AM release 3.4(1a)

Wed Dec 28 11:53:48 2005 Patch: nam-app-patch.3-4-2-0 Description: Patch 2 for N

AM release 3.4(1a)

Tue Aug 15 12:58:19 2006 Patch: nam-app-patch.3-4-3-0 Description: Patch 3 for N

AM release 3.4(1a)

root@nam-1# patch ftp://anonymous@10.3.100.81/c6svc-nam.3-5-1.bin.

gz

Proceeding with installation. Please do not interrupt.

If installation is interrupted, please try again.

Downloading c6svc-nam.3-5-1.bin.gz. Please wait...

Password for anonymous@10.3.100.81:

ftp://anonymous@10.3.100.81/c6svc-nam.3-5-1.bin.gz (66188K)

/usr/local/nam/patch/wor [########################] 66188K | 9218.54K/s

67777108 bytes transferred in 7.18 sec (9218.39k/sec)

Verifying c6svc-nam.3-5-1.bin.gz. Please wait...

Error: Verification failed.

Error: The signature of the patch you are trying to apply could not be verified.

It is not compatible with this release or the system time is off.

Error: Cannot continue with patch apply. Exiting...

root@nam-1#

1 ACCEPTED SOLUTION

Accepted Solutions
Blue

Re: Upgrading NAM-1 from 3.4(1a-Patch-3) to 3.5.1

Forgot to add earlier, c6svc-nam.3-5-1.bin.

gz is application image and you're using the wrong patch command here. To apply the application image update, you need to use the upgrade command.

4 REPLIES
Blue

Re: Upgrading NAM-1 from 3.4(1a-Patch-3) to 3.5.1

3.5(1) is the application image and in order to upgrade the application image, the NAM first must be booted into the Maintenance Partition. Have you done this first?.

Blue

Re: Upgrading NAM-1 from 3.4(1a-Patch-3) to 3.5.1

Forgot to add earlier, c6svc-nam.3-5-1.bin.

gz is application image and you're using the wrong patch command here. To apply the application image update, you need to use the upgrade command.

New Member

Re: Upgrading NAM-1 from 3.4(1a-Patch-3) to 3.5.1

Thanks rmushtaq, I will reschedule my maintenance window and try using the upgrade command. Doh.

I couldn't find a .readme file along with the .gz file to describe how to install.

Thanks again.

Silver

Re: Upgrading NAM-1 from 3.4(1a-Patch-3) to 3.5.1

Hi Darren

Here you are the guide to upgrade NAM application image (in Catalysts with IOS SW):

http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_guide_chapter09186a00805e34fd.html#wp1035516

Hope this helps

358
Views
12
Helpful
4
Replies
CreatePlease to create content