Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Upgrading WLSM to WiSM

When Upgrading WLSM to WiSM can you do this in a phased approach or is it the big bang approach? (Can you have both controllers running at the same time during migration with some APs going to WLSM and others going to the WiSM?)

Thanks.

1 REPLY
Silver

Re: Upgrading WLSM to WiSM

A migration strategy from the Catalyst WLSM to the Catalyst WiSM platform includes planning and execution of these actions:

1)Plan for and install the Catalyst WiSM.

2)Install the Catalyst WiSM platform.

3)Install the Cisco Wireless Control System (WCS) network management platform for the Catalyst WiSM.

4)Migrate the configurations from the Catalyst WLSM to the Catalyst WiSM-based platform to continue support of all lightweight and converted autonomous access points.

5)Train the support personnel on the Catalyst WiSM platform and solution.

6)Clean up the legacy configurations when the migration is complete.

For detailed information about the migration process refer:

http://www.cisco.com/en/US/products/hw/modules/ps2706/products_configuration_example09186a008073614c.shtml

166
Views
0
Helpful
1
Replies