Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

UPS & Power Supplies

In order to properly size a UPS to a multi-slotted switch, such as a Cisco 4506:

1. Do the switch's power supplies, modules and fan unit of the switch draw power from the UPS?

OR

2. Do the modules and fan unit draw power only from the switch's power supplies and therefore a switch's power supply is selected based on the modules and fans installed...and then the UPS is seleted based on the switch's power supply?

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: UPS & Power Supplies

Option 2, just make sure the power supplies you purchase provide enough power for all the modules you want install.

http://www.cisco.com/en/US/products/hw/switches/ps4324/products_data_sheet09186a00801f3dd9.html

HTH

Steve

1 REPLY
Silver

Re: UPS & Power Supplies

Option 2, just make sure the power supplies you purchase provide enough power for all the modules you want install.

http://www.cisco.com/en/US/products/hw/switches/ps4324/products_data_sheet09186a00801f3dd9.html

HTH

Steve

107
Views
0
Helpful
1
Replies