Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

Use aaa new-model

We use windows 2003 IAS and try to configure aaa new-model for authenticate to Cisco router and switch.

We have no problem at switch, but cant make it work at router with same configuration:

Here is the configuration:

aaa new-model

aaa authentication login default group radius local

aaa authorization exec default group radius local

radius-server host 10.x.x.100 auth-port 1645 acct-port 1646 key pass

radius-server host 10.x.x.101 auth-port 1645 acct-port 1646 key pass

I apply same config at the router, but doesn't, which I have no clue why.

Thanks

Ken

1 REPLY

Re: Use aaa new-model

It seems you have a space after your shared secret as in 'pass ' no both lines, try to reenter the command without the space, then use the 'test aaa' command to verify this. If you go to the IAS server logs, you might find a shared secret mismatch.

Regards

Farrukh

241
Views
0
Helpful
1
Replies