Debug ip icmp doesn't capture transit traffic. You can create an ACL to permit ICMP traffic and use it with debug ip packet to view ICMP traffic. You may have to turn off fast switching on the concerned interfaces for this to work. You can turn off fast switching by issuing the command 'no ip route-cache' on the interface.
Debug ip packet, even when it's used with an ACL, can cause the CPU spike up or even crash the router. Exercise caution if you are enabling it in a production network. You need a config like this one.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.