Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Use SNMP to ping

Dear Professionals,

I am trying to use SNMP to issue a ping from a switch.

Switch in question is a 4503:

IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I9S-M), Version 12.2(20)EWA

From the documentation I see that it would support the MIB CISCO-PING-MIB which looks like would/should work here.

Now, I am having trouble figuring out how to do this when I read the contents of the MIB in question. I was wondering if anyone knows of a tutorial that somewhat describes how to set this up?

with kind regards,

Kevin

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Use SNMP to ping

Look at this link, I think it explains in detail how to do it

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094e8e.shtml

HTH,

MArtin

2 REPLIES

Re: Use SNMP to ping

Look at this link, I think it explains in detail how to do it

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094e8e.shtml

HTH,

MArtin

New Member

Re: Use SNMP to ping

Thank you mermel. At your link we find a script for HP Openview that describes how to iniate the ping sequence.

This is perfect for me to figure out how it works.

Many thanks.

246
Views
0
Helpful
2
Replies