Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

dal
New Member

User name not logged when using CNA

Hi!

I've just started to explore the excellent system with the archive function in Cisco switches, and my setup looks like this:

archive

log config

logging enable

logging size 500

notify syslog

hidekeys

And when using telnet to control the switch it works perfect. Every change I make to the switch is sent to the syslog together with my login name, like this:

05-04-2007 09:31:27 Local7.Notice 10.10.27.1 781: May 4 09:31:23: %PARSER-5-CFGLOG_LOGGEDCMD: User:og4 logged command:log config

But when logging in via Cisco Network Assistant (CNA), the user name is not displayed, like this:

05-04-2007 09:16:30 Local7.Notice 10.10.27.1 779: May 4 09:16:26: %PARSER-5-CFGLOG_LOGGEDCMD: User:unknown user logged command:no switchport nonegotiate.

This of course undermines the whole idea of logging who did what.

Is this a bug or just something i forgot to configure?

I use radius to authenticate by the way, and that works perfect with both telnet and CNA.

Funny thing is, when using the command login on-success log, it is the other way around;

When using CNA the successfully logged in user is displayed, but when using telnet, no user name comes up, like this:

05-04-2007 10:07:24 Local7.Notice 10.10.27.1 800: May 4 10:07:20: %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success [user: ] [Source: 10.50.50.240] [localport: 23] at 10:07:20 CET Fri May 4 2007

05-04-2007 10:07:04 Local7.Notice 10.10.27.1 799: May 4 10:06:59: %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success [user: og4] [Source: 10.50.50.240] [localport: 80] at 10:06:59 CET Fri May 4 2007

Thanks.

1 REPLY
dal
New Member

Re: User name not logged when using CNA

*bump*

No one else had this problem?

Maybe I should make a TAC case.

126
Views
0
Helpful
1
Replies
CreatePlease login to create content