Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

User Tracking Problem

Hi,

Currently, I have upgraded my LMS to 2.6 and CM to 4.0.7.

My user tracking when I ran it, it only produces the following MAC address, port, and the name of the switch (where it is connected). It doesnt have the IP address and the Hostname.

I would like to know how to troubleshoot this. From the debugging, I already activated the vmpsadmin for debugging. What will I look for?

Thanks in advance.

2 REPLIES
Silver

Re: User Tracking Problem

If you can get the mac addresses but not the IP that indicates that Ciscoworks can't speak to the router that is the default gateway of the machines using these mac addresses.

Take a few mac you identified. Find out what their default gateway is and check if that router is managed in campus.

Cheers,

Michel

New Member

Re: User Tracking Problem

All switches are configured with the default gateway pointing to a netscreen firewall. I already check the arp entry of the switch and it manifest the switch IP and MAC address only. do we have a work around for this?

Thanks!

124
Views
0
Helpful
2
Replies
CreatePlease login to create content