Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

User Tracking

Hi,

Can't able to get the End Host Table in Cat 6500 series other switches are doing fine, Already updated the Cisco Works to LMS 2.6, CS 3.0.5, CM4.0.9, User Tracking 1.1.1,. Still does not work with the CAT 6500 series. Any ideas regarding this matter?

Thanks...Carl

3 REPLIES
Cisco Employee

Re: User Tracking

Enable core, corex, and vlad debugging under Campus Manager > Admin > Campus Data Collection > Debugging Options, then run a new Campus Data Collection, and post the resulting ani.log.

New Member

Re: User Tracking

Hi Mr. Clarke,

Already enable the debug under CM 4.0.9 with the core,corex and vlad debugging.Attach file is the ani.log result after issuing the debugging. Need your update ASAP. Thanx..Carl

Cisco Employee

Re: User Tracking

You are not hitting the obvious problem, so now you will need to enable vmpsadmin debugging under the same location, then run a full User Tracking Acquisition, and post the ut.log. You will also need to include the hostname and IP address of the missing 6500.

133
Views
0
Helpful
3
Replies