Re: Using Ciscoworks to audit for specific config items
Assuming you have LMS 2.5 or higher, you can use the Baseline Template feature of RME to accomplish this. The idea is that you first create a template that contains the mandatory lines that should be present in all your devices. For example:
+ logging server 10.10.10.10
+ service password-encryption
+ tacacs-server host 10.10.10.20
Then you run a job that compares all applicable devices against this template. The resulting report will show you the compliant and non-compliant devices. You will then be given the option to deploy the missing configuration lines to those devices.
This is a very simplistic overview of config baselining in RME. You should checkout the online help for much more details. The baseline feature can be found under RME > Config Mgmt > Archive Mgmt > Baseline Templates.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.