Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

USING SNMP FOR FETCHING RUNNING CONFIG

Hi,

I dont have access to a router. But I have SNMP read write permission. I am equiped with an SNMP r/w community string. Is it possible to view the running configuration using SNMP polling using any specific MIB? Please help me in this.... Thanks in advance

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: USING SNMP FOR FETCHING RUNNING CONFIG

You will have to transfer the configure using a protocol such as TFTP or RCP. You will not be able to see it with SNMP alone.

3 REPLIES
Cisco Employee

Re: USING SNMP FOR FETCHING RUNNING CONFIG

Yes, this is possible. See this tech tip on how to fetch and deploy configurations using SNMP and the CISCO-CONFIG-COPY-MIB:

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_configuration_example09186a0080094aa6.shtml

New Member

Re: USING SNMP FOR FETCHING RUNNING CONFIG

Thanks for the reply,

I would prefer to View the config on the SNMP tool console? COz We cant export to TFTP server since there is a firewall in between... any hope? Or i will try to set up a TFTP server

Cisco Employee

Re: USING SNMP FOR FETCHING RUNNING CONFIG

You will have to transfer the configure using a protocol such as TFTP or RCP. You will not be able to see it with SNMP alone.

730
Views
15
Helpful
3
Replies