Using SNMP to determine IP SLA Monitor operation result.
I'm using this IP SLA configuration to determine reachability
ip sla monitor 51 type echo protocol ipIcmpEcho 192.168.1.1 ip sla monitor reaction-configuration 51 timeout-enable threshold-falling 5000 action-type trapOnly ip sla monitor schedule 51 life forever start-time now
the show ip sla monitor stats
Round trip time (RTT) Index 51 Latest RTT: 1 ms Latest operation start time: 15:12:51.963 GMT Thu Dec 3 2009 Latest operation return code: OK Number of successes: 20 Number of failures: 0 Operation time to live: Forever
Now I need to read the CISCO-RTTMON-MIB to read the object "OK" but I'm not able to find this value.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...