Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Vlans misses in switch trunk port

I see in some cisco switches that vlans in trunk port misses frequently.what must be the reason behind this??

3 REPLIES
New Member

Re: Vlans misses in switch trunk port

Can you provide more information?

For example:

If you are referring to something like:

show run int fa 0/1 giving the following output:

interface fastethernet 0/1

switchport mode trunk

vs

interface fastethernet 0/1

switchport mode trunk

switchport trunk allowed vlan 1,25,200

or are you referring to something like show vtp status or show spanning-tree output.

New Member

Re: Vlans misses in switch trunk port

Can you provide more information?

For example:

If you are referring to something like:

show run int fa 0/1 giving the following output:

interface fastethernet 0/1

switchport mode trunk

vs

interface fastethernet 0/1

switchport mode trunk

switchport trunk allowed vlan 1,25,200

or are you referring to something like show vtp status or show spanning-tree output.

New Member

Re: Vlans misses in switch trunk port

Thanx for ur reply,

i have tried sh run int faX/y and also tried sh int fax/y switchport

After i manually add vlan,then it starts to work.Its happening to some switch trunk port only .

its cisco 2950 24 port switch.

143
Views
0
Helpful
3
Replies