VoIP - CAS channel operational status

[daniel.aquere]

Hi,

I need to know the status of the channels of voip in my router.

I tried the following:

However, the status is not altered. He is always in "dormant."

As I could know the status of my voice channels. And, if possible, that a trap was generated when the status changed.

Thanks in advance.

Daniel

[carenas123]

think, you can use the "show voice port" command to check the voip channel status. check out the following link on VoIP with Channel Associated Signaling, hope this helps :

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_configuration_example09186a00800fa115.shtml