VPN3030 & LMS 4.1.1

[drew.salmon]

I am trying to inventory & archive a VPN Concentrator 3030. I am able to get the inventory piece to work, however, the archive is failing. CW reports the following:

*** Device Details for VPNC3030 ***

Protocol ==> Unknown / Not Applicable

Selected Protocols with order ==> TFTP,SSH,Telnet

Execution Result:

RUNNING

CM0151 PRIMARY RUNNING Config fetch failed for VPNC3030 Cause: TFTP Protocol not supported for VPN3000

SSH Protocol not supported for VPN3000

TELNET Protocol not supported for VPN3000

Action: Check if protocol is supported by device and required device package is installed. Check device credentials. Increase timeout value, if required.

Does anyone have any info about how to successfully archive the VPN 3030 config with RME 4.1.1?

Thank you.

[Joe Clarke]

You need to add HTTPS to your transport settings for the VPN concentrators under RME > Admin > Config Mgmt > Transport Settings.

[drew.salmon]

Joe, as always, thank you very much for your help. That fixed my issue. I was able to get the device config to archive.