Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

vty lines full 4507

Help, we have a 4507 and the 5 vty lines are full of idle sessions....

We could open up more lines but I want to just kill off these idle sessions as they are have no timeout. The only way we can get in at the moment is via the console.

Can anyone please advise? i've tried the command disconnect line etc i've also now added an idle timeout of 60 mins but this has had no effect on these open sessions.

Thank in advance

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: vty lines full 4507

Try clear line X. For example:

Switch#show line

Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int

0 CTY - - - - - 0 0 0/0 -

* 1 VTY - - - - - 788 0 0/0 -

* 2 VTY - - - - - 117 0 0/0 -

3 VTY - - - - - 36 0 0/0 -

4 VTY - - - - - 19 0 0/0 -

5 VTY - - - - - 0 0 0/0 -

Switch#clear line 2

[confirm]

[OK]

That should free up the other VTYs.

3 REPLIES
Cisco Employee

Re: vty lines full 4507

Try clear line X. For example:

Switch#show line

Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int

0 CTY - - - - - 0 0 0/0 -

* 1 VTY - - - - - 788 0 0/0 -

* 2 VTY - - - - - 117 0 0/0 -

3 VTY - - - - - 36 0 0/0 -

4 VTY - - - - - 19 0 0/0 -

5 VTY - - - - - 0 0 0/0 -

Switch#clear line 2

[confirm]

[OK]

That should free up the other VTYs.

New Member

Re: vty lines full 4507

thanks for the quick reply, i'll try and let you know

New Member

Re: vty lines full 4507

thanks this resolved the issue

509
Views
0
Helpful
3
Replies
CreatePlease login to create content