Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VWIC3-4MFT-T1/E1 Module oid problem

Dear All

We have a 2951 Router with IOS version 15.4.3M2(ED) Universal version installed on that, in addition there 2  VWIC3-4MFT-T1/E1 modules installed on the router.

One of them is installed on Slot 0 and Sub Slot 0 and another is installed on Slot 0 and Sub Slot 1 . we want to monitor the total number of Active calls on each of 

these 8 E1 ports via SNMP in our PRTG software.

Right now we have used the 1.3.6.1.4.1.9.10.19.1.1.9.1.3.x.y (x=Slot Number, y=Sub Slot Number) OID to Monitor the number of active calls on the first E1 Module 

which has been installed on Slot 0 and Sub Slot 0 . The problem is that this OID doesn’t show us the number of calls on the second  E1 module which has been installed on the Slot 0 Sub Slot 1.

I was wondering if there is a workaround regarding this issue?!!! Or is there an alternative way to monitor the number of total  active calls on the second module?!!

Any Help would be appreciated.

40
Views
0
Helpful
0
Replies
CreatePlease login to create content