Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WAAS configuration with 3750 or 3560

Hi, I'm trying to connect these two devices and still could not get it.

Could you please give me a hand with the wccp config?

Attached I post the switch conf, the wae conf and the deb ip wccp events output in the switch and the sh wccp routers on the wae.

Thanks very much.

Rgds.-

Esteban

4 REPLIES
New Member

Re: WAAS configuration with 3750 or 3560

Hi Esteban,

change the configuration on your wae from:

wccp tcp-promiscuous router-list-num 1 mask-assign l2-return

to:

wccp tcp-promiscuous router-list-num 1

and configure on the switch on the interface that connect to the waas the command:

ip wccp redirect exclude in

to prevent routing loop.

Regards,

Benny

New Member

Re: WAAS configuration with 3750 or 3560

Hi Benny, I made the changes you told me so, but still no connection. Indeed I've tried all possible forms, L2-redirect, L2-return with and without mask-assing and nothing. Could you tell me some other things to try, besides this I have a doubt about the router-list defined, is it suppoused to be the ip wich the WAE is connected against or it has to be the ip range wich I want to accelerate?

Thanks.

Esteban

New Member

Re: WAAS configuration with 3750 or 3560

Hi Esteban,

You shouldnt configure L2-redirect or L2 return on the wae.

you should configure "wccp tcp-promiscuous router-list-num 1".

olso make sure you are using wccp v2 on the switch.

The router list should be the ip address of the router/l3switch.

Regards,

Benny

New Member

Re: WAAS configuration with 3750 or 3560

Benny, sorry to bother you but still nothing, no WCCP L2 connection.

Attached I post the output of the wccp packets and events debug in the switch and the WAE.

Hope this could help!

Thanks a lot.

Esteban

461
Views
0
Helpful
4
Replies