05-14-2010 11:35 AM
is there anyone monitoring WAAS? like the cpu.,memory or interface.I would like to monitor using Cacti and if any one locate me all usefull OID for WAAS I am really apperciated.
Thanks,
Solved! Go to Solution.
05-17-2010 03:14 PM
The object is hrProcessorLoad:
hrProcessorLoad OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average, over the last minute, of the percentage
of time that this processor was not idle.
Implementations may approximate this one minute
smoothing period if necessary."
::= { hrProcessorEntry 2 }
05-16-2010 02:27 PM
Go to ftp://ftp-sj.cisco.com/pub/mibs/supportlists/wafs/WAFSMIBSupportList.htm to view the list of MIBs supported by the WAAS. The HOST-RESOURCE-MIB will give you CPU and memory utilization information. The device does support the ifTable, so the standard ifInOctets and ifOutOctets will provide you interface utilization stats.
05-17-2010 09:23 AM
thank you very much for your response. I got solution for most of my objective excpet CPU. I could't find OID for CPU utilization on HOST-RESOURCE-MI.
05-17-2010 03:14 PM
The object is hrProcessorLoad:
hrProcessorLoad OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average, over the last minute, of the percentage
of time that this processor was not idle.
Implementations may approximate this one minute
smoothing period if necessary."
::= { hrProcessorEntry 2 }
05-17-2010 03:42 PM
Thank you so very much!!!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: