Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

WAAS OID

is there anyone monitoring WAAS? like the cpu.,memory or  interface.I would like to monitor using Cacti and if any one locate me all usefull OID for WAAS I am really apperciated.

Thanks,

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: WAAS OID

The object is hrProcessorLoad:

hrProcessorLoad OBJECT-TYPE
    SYNTAX     Integer32 (0..100)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The average, over the last minute, of the percentage
        of time that this processor was not idle.
        Implementations may approximate this one minute
        smoothing period if necessary."
    ::= { hrProcessorEntry 2 }
4 REPLIES
Cisco Employee

Re: WAAS OID

Go to ftp://ftp-sj.cisco.com/pub/mibs/supportlists/wafs/WAFSMIBSupportList.htm to view the list of MIBs supported by the WAAS.  The HOST-RESOURCE-MIB will give you CPU and memory utilization information.  The device does support the ifTable, so the standard ifInOctets and ifOutOctets will provide you interface utilization stats.

Community Member

Re: WAAS OID

thank you very much for your response. I got solution for most of my objective excpet CPU. I could't find OID for CPU utilization on HOST-RESOURCE-MI.

Cisco Employee

Re: WAAS OID

The object is hrProcessorLoad:

hrProcessorLoad OBJECT-TYPE
    SYNTAX     Integer32 (0..100)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The average, over the last minute, of the percentage
        of time that this processor was not idle.
        Implementations may approximate this one minute
        smoothing period if necessary."
    ::= { hrProcessorEntry 2 }
Community Member

Re: WAAS OID

Thank you so very much!!!

547
Views
0
Helpful
4
Replies
CreatePlease to create content