Want To Report On (Video) Queue Avg. Util/Max Util with Prime Infr 2.0
We just got Prime Infrastructure 2.0 in, and I've just been given a very aggressive time-line to implement Telepresence. We have an MPLS network with differential services configured. Particularly on the WAN routers, we have modular QoS with LLQ. I'd like to be able to find/report on the maximum utilized BW in a particular queue (with classifications of CS4, AF4X) per day, or the average BW utilization of that queue per hour is. Could someone please suggest what might be the best way to capture that information?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...