Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

warning: unable to update SNMP users database

 

dears,

 

when adding or deleteing a user on router CLI i receive the below warning:

warning: unable to update SNMP users database

reason: generic error

 

we are using SNMPv2

 

please advise.

thank you.

8 REPLIES
Cisco Employee

Hi , looks like a BUG. what

Hi ,

 

looks like a BUG.

 

what command you are using to add the user , share the complete output .

what is the device type ?

 

Thanks-

Afroz

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
Community Member

Hi,i am doing this on an ACE

Hi,

i am doing this on an ACE:

ACE/Admin(config)# no username joseph

warning: unable to update SNMP users database

reason: generic error

ACE/Admin(config)# no username someone

warning: unable to update SNMP users database

reason: generic error

ACE-/Admin(config)#

regards

 

Cisco Employee

this is a BUG on ACE device

this is a BUG on ACE device :

Unable to update SNMP users database
CSCts42477
 
 
Thanks-
Afroz
***Ratings Encourages Contributors ***
Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
Community Member

is there any workaround or

is there any workaround or fix for this bug ?

please can you post the link for this bug id CSCts42477 ?

 

thank you

Cisco Employee

here is the link:https:/

here is the link:

https://tools.cisco.com/bugsearch/bug/CSCts42477/?reffering_site=dumpcr

 

 

Thanks-
Afroz
***Ratings Encourages Contributors ***
Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
Community Member

hi,please advise.we are using

hi,

please advise.

we are using SNMPv2 and have ace version 3.0(0)A5(1.1) which does not apply to the bug description below:

Symptom:
Standby ACE "snmp-server user password" MD5 hash as well as "privacy
password"
(if configured) synchronize with that of the Active ACE.
This results in SNMPv3 access failure to Standby ACE.

Conditions:
For an ACE pair in FT configuration :

(1) If the ACE is configured with an "snmp-server user" profile with or
without privacy password,
(2) Each ACE module is configured with a unique SNMPv3 "engineid" and
(3) the Standby ACE reloads.

Workaround:
Peer engine id is added.

 

Last Modified:
Jul 26,2012
Status:
Fixed
Severity:
2 Severe
Product:
Cisco ACE 4700 Series Application Control Engine Appliances
Support Cases:
0
Known Affected Releases:
(1)
3.0(0)A4(2.1.48)
Known Fixed Releases:
(5)
3.0(0)A4(2.1.48)
3.0(0)A4(2.1.66)
3.0(0)A4(2.2)
3.0(0)A5(1.99.60)
3.0(0)A5(2.0)
Cisco Employee

this is the closest BUG  I

this is the closest BUG  I can find.

open a case ,  they will check with BU(development).

 

Thanks-

Afroz

***Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
Community Member

could it be that since we are

could it be that since we are using SNMPv2 we cannot do sychronisation between user database and CLI users ?

257
Views
0
Helpful
8
Replies
CreatePlease to create content