Re: What are "unconnected devices" in CiscoWorks Topology.....
Unconnected devices are those which are in DCR, but do not have a CDP neighbor relationship with other devices in DCR. In order to get those devices onto the Layer 2 View, you will need to make sure CDP is properly negotiated with the device's neighbors. There is no way to manually move devices, or draw links in Campus Manager.
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...