What should be a good checklist for hardware & software of cisco hardware maintenance?
I usually see many datacenters or worse, IDF's with forgotten Cisco equipment, full of dust and pretty dirty. I usually should use an air compressor for dust retirement, but I wonder if there is a check list, advices or musts of what a good cleaning of a router, switch or access point can be applied.
- What could be good ideas for cisco hardware maintenance?
- What could be good ideas for cisco software maintenance?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...