Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

when snmp software get the 2811's route tabel,2811 appears host/32 route:

case:when snmp software get the 2811's route tabel,2811 appears host/32 route:

2811-rt123#show ip route con

21.0.0.0/8 is variably subnetted, 11 subnets, 7 masks

C x1.yy.240.216/32 is directly connected, Serial0/0/0.400

C z1.yy.224.172/32 is directly connected, FastEthernet0/2/0

C z1.yy.224.172/30 is directly connected, FastEthernet0/2/0

C z1.yy.61.126/32 is directly connected, Loopback0

C z1.yy.61.64/32 is directly connected, FastEthernet0/0 <<<<

22.0.0.0/8 is variably subnetted, 4 subnets, 4 masks

C z2.yy.61.64/32 is directly connected, FastEthernet0/1 <<<<<<

Show run

!

interface FastEthernet0/0

ip address z1.yy.61.65 255.255.255.224 <<<<

ip access-group PASS in

no ip proxy-arp

duplex auto

speed auto

bridge-group 1

bridge-group 1 input-lsap-list 200

!

interface FastEthernet0/1

ip address z2.yy.61.65 255.255.255.224 <<<<

no ip proxy-arp

duplex auto

speed auto

!

2811-rt123#clear ip route * (can correct the route table)

21.0.0.0/8 is variably subnetted, 10 subnets, 7 masks

C x1.yy.240.216/30 is directly connected, Serial0/0/0.400

C z1.yy.224.172/30 is directly connected, FastEthernet0/2/0

C z1.yy.61.126/32 is directly connected, Loopback0

C z1.yy.61.64/27 is directly connected, FastEthernet0/0

22.0.0.0/8 is variably subnetted, 4 subnets, 4 masks

C z2.yy.61.64/27 is directly connected, FastEthernet0/1

2811-rt123#

------------------ show version ------------------

Cisco IOS Software, 2800 Software (C2800NM-ENTBASEK9-M), Version 12.4(15)XY, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Mon 17-Dec-07 17:44 by prod_rel_team

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

GZYJ_1C0 uptime is 1 day, 3 hours, 16 minutes

System returned to ROM by power-on

System image file is "flash:c2800nm-entbasek9-mz.124-15.XY.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco 2811 (revision 53.51) with 249856K/12288K bytes of memory.

Processor board ID FHK1148F0JW

3 FastEthernet interfaces

2 Serial(sync/async) interfaces

6 Low-speed serial(sync/async) interfaces

DRAM configuration is 64 bits wide with parity enabled.

239K bytes of non-volatile configuration memory.

62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102

126
Views
0
Helpful
0
Replies
CreatePlease to create content