I have done the configuration as per the Deployment guide.
As per the deployment guide to check the netflow data I have to check Design > Monitoring Templates and see if there are multiple NetFlow instance ( I think I need to go to Design> Monitoring configuration there is no monitoring templates)
Multiple netflow instance where will I find is it the Flexible netflow template?
Also want to know how will I find out the template has been successfully deployed and netflow data is receiving in the prime.
What is the template ID in the netflow templates how we can assign the template ID to the device.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...