Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

WLC not recognized in Campus Manager Topology Map

Hi Experts,

WLC (4400 series) is not recognized in Campus Manager 5.1.3 Topology Map despite the device state under CM is Managed.

Please advise!!

Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: WLC not recognized in Campus Manager Topology Map

Make sure you have SNMPv1 enabled on the WLC. This is not enabled by default.

5 REPLIES
Cisco Employee

Re: WLC not recognized in Campus Manager Topology Map

What does it appear as on the topology map? What is its sysObjectID?

New Member

Re: WLC not recognized in Campus Manager Topology Map

Hi Joe,

It appears as a red box with question mark on the topology. The sys OID is 1.3.6.1.4.1.14179.1.1.4.3

Cisco Employee

Re: WLC not recognized in Campus Manager Topology Map

Make sure you have SNMPv1 enabled on the WLC. This is not enabled by default.

New Member

Re: WLC not recognized in Campus Manager Topology Map

But I am using SNMPv2c now...Why SNMPv1 must be enabled?

Cisco Employee

Re: WLC not recognized in Campus Manager Topology Map

The version of Campus you have requires it.

157
Views
0
Helpful
5
Replies
CreatePlease to create content