Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WLC

Hi,

I have WLC and it is not coming green on the topology service when the

SNMP v2 or v3 is enabled. But it shows green when I enable SNMP v1 on it.

How can we set SNMP v2 or v3 on WLC to have the device come green in Topology as well?

-Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: WLC

Yes.

3 REPLIES
Cisco Employee

Re: WLC

You must enable SNMPv1 on the WLC. That is required to manage it if you are using community string-based SNMP. LMS 3.2 has converted to mostly using SNMPv2c, and only falling back to v1 if absolutely necessary.

New Member

Re: WLC

Thanks Jclarke,

One last question, if I upgrade to LMS 3.2 can I use the SNMP v2 option on my WLC?

-Thanks

Cisco Employee

Re: WLC

Yes.

245
Views
5
Helpful
3
Replies
CreatePlease to create content