11-24-2008 11:29 PM
my client has LMS2.5 and now is updated with RME 4.0.4 and Common services 3.0.4,
the device package that supports this particula rmodel WS-C2960-8TC-L needs MDF1.6 which I found a downloadable file howver it says it needs common services 3.05 which only comes with LMS2.6...does this mean that with LMS 2.5 my client has no option but to upgrade to 2.6 just for this particular model to be recognised propoerly?
11-25-2008 06:47 AM
This device is supported in RME 4.0.4 with Cat2960 devices package version 2.1. You should be able to install MDF 1.21 in CS 3.0.4. You can do this from Common Services > Software Center > Device Update.
11-25-2008 06:53 AM
Hi,
Thanks for replying. my client has presently MDF Base Package 1.0.4
all versions attached..
so if i upgrade just the mdf from 1.0.4 to 1.21, it will let me install the packages ? so far i tried to install the packages, through gui, command line and direct through web and always got the attached error
11-25-2008 07:03 AM
You can upgrade to MDF 1.21 in CS 3.0.4. However, I do not know if that is the reason for the error you're seeing. You did not provide enough details. This may point to another packaging problem. Make sure that when you're doing the upgrade, you select all available packages for both RME and Common Services.
11-25-2008 07:40 AM
11-25-2008 07:50 AM
The problem is almost always a missing or incomplete dependency. That is why I said to download ALL available packages. Even still, it may be that your installation is bad. This is typical on Windows platforms. When such a problem occurs, it is often necessary to uninstall and reinstall RME with anti-virus software disabled and with short values for the TEMP and TMP environment variables (e.g. C:\WINDOWS\TEMP).
11-25-2008 11:57 PM
Hi,
I do not think that the RME is faulty as everything works fine. the only issue they have is that the 2960-8 switches show as unknown. What I cannot understand is how does an MDF 1.16 version require CM 3.06 while an MDF 1.21version only requires CM 3.0 or higher?
MDF 1.16 - This package requires CiscoWorks Common Services 3.0.5.
MDF 1.21 - This package requires CiscoWorks Common Services 3.0 or a higher version.
11-26-2008 08:09 AM
I don't know where you're seeing this, but MDF 1.21 is valid for CS 3.0.4.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide