This one has me scratching my head. We have a number of these devices on our network all configured exactly the same (well apart from the obvious necessary changes). However Cisco LMS does not discover some of the devices whilst it easily discovers others.
The IOS versions are all the same and the SNMP details are all the same. When I enable SNMP debugging on one of the devices that is not found, the log file shows the entries below.
Feb 14 15:47:11: SNMP: Packet received via UDP from xx.xx.xx.14 on Vlan2
Feb 14 15:47:11: SNMP: Get request, reqid 13722, errstat 0, erridx 0
The errstat 2 indicates that the device is reporting that sysObjectID is not a valid object. So either SNMP is completely broken on this device, or there is a view applied to the community string being used with excludes sysObjectID. A full show run and show ver would help narrow down this problem.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...