09-25-2008 10:00 AM - edited 03-11-2019 06:49 AM
Hi, i have asa 5510 with version 7.02. I configure manually ip address of management interface 192.168.1.1 and mask 255.255.255.0. I diseble DHCP and permit that subnet 192.168.1.0/24 can access via HTTP. But i try to conect https://192.168.1.1 and dont receive response.
any more topic for verify.
Thanks
09-25-2008 12:13 PM
You should have :
http server enable
http 192.168.1.0 255.255.255.0 management
and basic connectivity from PC to management interface.
Also,you can issue :
sh version command to verify if an asdm image is installed.
In the second line of the output,you would see if an asdm image is actually installed.
For making sure that there is no rogue dhcp configuration left,issue
cl config dhcpd
Try again.
Best of luck.
Do rate helpful posts.
Regards,
Sushil
09-25-2008 04:30 PM
Thanks. Very useful
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide