Hello, We have two ASA5585s physically connected for FO. Two interfaces have been used; one interface is used for the State Link and the second link is configured for the LAN FO. I've read in some documentation that the recommended configuration fo...
Forum Posts
Hello Team, We have to manage ASA Firepower from Management Center-1000, while following procedure we were getting below issues. while configuring in firepower we could get below error > configure manager add 10.239.0.132 cisco123getPeersByRole:...
Resolved! ERROR: Object group INT_ not found
I am having this issue when I try to place an object-group on my OUTSIDE-IN ACL. I am not sure why I am receiving this error? Here is the Object-Group # sh run | begin INT_BLOCKED_IPsobject-group network INT_BLOCKED_IPs description Blocked_Inter...
Hi, I would like to know if intruder(attacker) attack our network and intercepted by our IDS we will get alarm generated but , what reply will attacker see? 1- will attacker receive any reply back from IDS , alarm or he see his request has been drop...
Hi everyone, I can't type configure terminal command with my asa 5506, does this command has been replaced to the another command? Any one can explain to me this issue ? Many Thanks
Hi Guys I'll be doing a migration from a pair of 5520's in active/standby to 5520-X's. My firewall knowledge is very rusty so I have a few basic questions. 1. I'm going from asa firmware 8.4 to 9.8. Will this be a simple copy and paste job or wi...
I’m configuring an ASA 5585X and want to know if there is a command that will configure the firewall to show when an administrator has acknowledged an error or alarm. I’ve already configured the device to send email alerts, but specifically I’m looki...
Hello every one I have a ChackPoint firewall configuration that I need to convert to Cisco. Is there any tool I can use for the converting. I have tried to download one from Cisco.com https://software.cisco.com/download/release.html?mdfid=28058280...
Hi Experts Getting error while creating ECMP on FTD. Please see snapshot.
Hello All, I am having some issues regarding ASA-5506 Firewall. I currently have few routers and servers connecting to the outside with the following protocols on Cisco 2911's: -OSPFv2 (Important) - HTTP -HTTPS - FTP -SFTP - ETC I have tried f...
Hi All We have an ASA with a current software, without IPS functionality in use. We manage it through CSM. Is there a way to implement the free spamhaus.org DROP list as a drop list in the ASA, which would get updated automatically? Thanks
Ciao, I read in some post and I found that Firepower uses brightcloud.com as webfiltering DB. Is that right ? I'm looking for the URL sites lookup in order to some tests and recategorizations. Thanks
hi! having a problem with ASA 5506x, I have configured the the firewall on transparent mode, am able to ping 8.8.8.8 on the firewall. I have several switches in my LAN, the problem is when I connect one switch directly to the firewall and connect a c...
what is the minimum requirement for deploying FS-VMW-10-SW-K9 ?
Hello guys.. I meet one problem that I have no idea what and how to check. See below my network drawing, two firewalls (ASA5505) are there between PRC domain and DMZ domain and Business domain. One of my PRC domain server RAE (10.41.10.3) is looking ...
