Network Security

I have had Bash environment variable light up the ips log the last few days.  When the target address is summarised 0.0.0.0 (a combination of ips addresses) I do not see the packets as being dropped.  When I have an individual target address 1.2.3.4 ...

Hi all, I have a Cisco ASA 5510 that I have AnyConnect VPN clients. At the local network I have an IPsec tunnel to a remote site. My inside interface on the ASA 5510 is 192.168.112.1/24, my IPpool for AnyConnect clients is 192.168.117.0/24. I have a ...

I have configured 5 interfaces Inside, Outside, DMZ, Branch_Offices and Management (This one as security level 100 to connect to another network). I need to NAT into a single IP everything from Inside and from Branch_Offices into Management. I need t...

Dear Expert, I have an ASA 5500 series with AIP SSM (IPS module), the login name and password are lost. According to the cisco portal, there are two approach to recover the password:1. using CLI command: hw-module module slot_number password-reset;2....

ver 9.1I was able to get an internal servers RDP (changed RDP port on server) open on a non-standard port to the outside. However, I now want to change the server back to the standard 3389 internally but still require the non-standard port to be used...

Link does not work for!End-of-Sale and End-of-Life Announcement for the Cisco Secure Access Control System 5.4!How do we get Cisco to fix?!see attachment 

I having problem when I try to change interface Ethernet0/1 to switchport access vlan 1, but when I try to monitor it using the run command it does not appear. What do I need to do to make it work? And also what is my next step so that I could access...

I have a pair of ASA 5520's in active/standby with a leg off the firewall being used for the DMZ servers.  The interface has an IP address on it.  Now I need to add a second vlan off this interface.  I realize that I will have to pull off the Ip addr...