After upgrading from 8.4 to 9.1.2 connection numbers are growing and we guess udp connections cannot finalize as usual.Normal udp timeouts are 2 mins but we have idle udp connections for 10 hours??Any known bug id or solution?
Yesterday I had a serious problem doing nat to a server I had to create a nat between inside and outside. The server already had an object created with a nat between inside and dmz, so I used the same object and set the nat to outside, thinking it's ...
Hi. A Pix-501 which is placed between an ADSL modem and gigabit router, makes the download speed from internet drop to 2.1 Mbit/s from 7 Mbit/s. Upload speed is not affected. Connecting router or pc/laptop directly to modem gives the ADSL line max. s...
Hello, I try to set a IP adress for the interface of mamangement 0/0, i work on ASA 5525-x, but i not find the command ip adress withen i am on the interface of mamangement 0/0 Thanks
I just cannot get it to work. I need devices on siteA to connect to devices on siteB, both with overlapping IP's. Then if I am at siteA and want to ping siteB server at 10.10.10.100, what IP do I ping? I hope I make sense, because L2L vpn is kickin...
Just wondering if you guys/ladies can push me in the right direction.I am planning on having 2 ASA Firewall on my internal networks connected to 2 different ISPs. See diagram above.Is this the way to go? What i want to accomplish is:People connecting...
Hi Everyone I have the following situation. My organization just acquired a 2nd internet connection from Rogers (fiber)To be used for Site to Site VPN Connections, Client access VPN, Email and all other server services.My Current config is as follows...
Under LMS 4.0.1 when I look at devices under credential settings for devices SHA1 is only available. Is there an add-on that needs to be installed to support SHA 256?
I have a customer with an ASA 5510 with asa915-k8.bin software running. The static nat rules keep disappearing for no apparent reason. The rest of yhe configuration is unaffected.
Hi,I just upgraded ASA to 9.1.3 version and of course I also upgraded ASDM to 7.3.1The problem is : ASDM 7.3.1 is consuming all CPU and become unresponsive. In java console, I can see a message in loop : [AWT-EventQueue-0] ERROR com.cisco.dmcommon.ut...
I have two web server and I want to configure ASA 5505 in such a way that it forward all incoming request to ServerA. In case if ServerA is down or failed ASA 5505 automatically forward all incoming request to ServerB.I am new to ASA 5505.Thanks in a...
Hello,I am currently in the process of setting up our two new Cisco firewalls (both are 5515-Xs) and have two questions in regards to that, since I'm rather new to ASA configurations. 1. I want to use the configuration of our old ASA (5510), which sh...
I'm creating a zone base firewall solution and all appears to be fine until I create a class-map type inspect match-all or anyand match access-group name acl to match an extended ACL and once I match it the commands runs but when I go back to view th...
