Network Security

I have ASA 5505 configured with version 8.2 but unable to ping from ASA to 8.8.8.8 or any public ip. I have following topolgy. Following is the logical diagram                                      192.168.100.1/24                          192.168.100...

Hi Community,i´m new to Cisco Security Manager. Is it possible to trigger an Email Alarm when a High Risk IPS Event comes in? How can i configure this task?Thank you,Florian

Hi all,I'm having a problem with ZBFW appearing to cause retransmits when connecting from an inside host to a host on the remote side of the DMVPN.  ICMP appears to work fine, but RDP ends up with two sessions: one established and one half-open.  Whe...

Hi,I have been asked the followig questions off one of my server engineerswe have 2 sites Site A - 10.0.0.0 subnet which hosts all the internal serverSite B - 192.168.25.0 - no servers hereboth connect via an IPSec tunnel.I have been asked if at site...

I know how to set this up on a router (dynamic access-list - lock and key)... But, I'm having trouble understanding how to setup OUTSIDE to INSIDE cut through proxy authentication for RDP.OUTSIDE to INSIDE RDP is currently working.I have 2 servers I ...

I am working on ASA 5505 version 9.1(4)  but icmp ping from inside hosts to internet or router is not working.The running configuration are mentioned below; ciscoasa# sh run: Saved:ASA Version 9.1(4)!hostname ciscoasaenable password 2KFQnbNIdI.2KYOU ...

Hi i created two static route entries in my asa5505 like thisroute inside 192.168.0.0 255.255.255.0 192.168.11.22 1route inside 192.168.0.0 255.255.255.0 192.168.11.40 20the last route had a higher metric i was hoping that the asa would only use it i...

Hi Team,I have the below cisco ime and managing the below ips devices.I am getting information kind of alert mails but not getting any high or medium email alerts. Test mail is also working.Cisco IME Version: 7.2.6IPS Version: Version 7.0(2)E4, 7.0(8...

Dear Colleagues,I have a CISCO RV042.I would like to implement web & content filtering by diabling all video and voice  traffic. So in this cas even if the person does not open a video streaming site and gets the content via facebook or another site ...

Hello,I've just been trying to configure my 892 router to accept PPTP connections (not passthrough but it being the PPTP server) but I'm continuously getting 619 errors. I've tried multiple different configurations and I'm just hitting a brick wall. ...

Hello All,I have a HQ with few hosts (10.1.1.x) which need to communicate to Remote office's hosts via VPN tunnel and servers via normal routing. Due to some limitation, we need HQ hosts to appear as from 20.1.1.x network for the RO which can be done...

Hi Team,We have upgraded the ASA code from 8.X to 9.X, Post this i have cleared the nonat & policy ACL which was enabled in old code, nearly 6000 unwanted lines from the ASA has been cleared, what would be benefit of this. Will there be any command w...