Network Security

I am running an ASA with 8.0(2) code and http inspection enabled globally. For just one internet site in particular, it is virtually impossible to pull up a PDF page through a browser. It hangs up about 40% of the way through the 1.1MB download. I cl...

Hello all,Is it possible to enable logging to check dhcp stats? I have 252 bindings limit on an asa and would to know if there was a way to get the information of the maximum bindings at any given time on an asa. Also, if there has been a rejected re...

Hi all -I’m intending to establish a VPN connection between Nortel 1140E phone behind a ADSL router and a Cisco ASA 5520.can any one confirm to me if the vpn client on the Nortel 1140E phone is compatible with Cisco ASA

we have 3 subnet A, B, C . Each subnet have some linux servers. Subnet C is protected by cisco IPS 4270. 1)If we config IPS to bypass traffice, copy speed between servers around 10MB/s -> 25MB/s.2) IF  IPS protect subnetC.When we copy file from a ser...

Hello,Our ASA CPU level has been higher than normal over the last few weeks and I can see a reason why.  I have noiced that tha dashboard has had the top graphs/tables re-enabled, which I beleive can cause the CPU to rise, how can I turn these off ag...

We have an web publishing services running through TMG and ofcourse its through cisco firewall. 25 to 30 www services published sofar no issue. recently i have noticed and occured some weared things. meaning, I can see traffic from my ISP to MY perim...

I have a bonded T1 3 MB circuit and need to add QOS to allow guaranteed 1.5 MB throughput to below IPSEC tunnel  destination 10.10.22.0. Then all other internet traffic fifo. We are using ISO 7.2(2) and ASDM 5.2(2)What's the best way to configure QOS...

When i want to use two ASA 5512-X in a failover cluster (Active-Standby), i need two Security PLUS licenses and also two VPN licenses like AnyConnect Essentials:http://www.cisco.com/en/US/docs/security/asa/asa84/license/license_management/license_86....

hello..I am not able to connect FTP server of my client behind ASA but it is working if i bypass ASA. I have checked packet tracer its showing all phases are allowed. Can you pls help me what else could i check to solve this.I have ASA ver 8.4(3).   ...