Network Security

I have 2 x ASA acting as default gateways the two can ping each other but when i tried to ping the far end devices like servers from one of the ASA it does not ping.dc3-fw1# ping 192.168.98.13Type escape sequence to abort.Sending 5, 100-byte ICMP Ech...

Dear All,The ASA is configured to send the syslog messages to syslog server.I just want to know how can I display (view) those messages from the server, and will this overload the server after some time? how can I check the load status?Your help will...

Hello,I have 2 ASA and would like to build a Side-to-Side VPN between these ASA. So I can learnsomething about configure a ASA for different thinks. But now I don`t can Ping from a Clientto the Internet-Router.My Configuration is:Client IP 192.168.1....

Hello all,I have an asa-ssm-10 module with software version 7.0(2)E4, and was wondering when or if I should upgrade.  There doesn't seem to be any issues with the IPS, so if it were a switch or router I wouldn't think I need to, but with it being an ...

Our Internal Auditor is asking for a copy of the logs or a report from our IPS showing that it is indeed keeping bad guys out.  If you have had this same request, what info have you provided?

Hi I just try to ping a internal Host but it want to go, Can please help me some one?Laptop<===>ASA5505Connected is the Laptop at Ethernet 0/2 InsideMy running-config is a clear config, only VLAN 1 has a IP and ethernet 0/2 is up.But If I try to ping...

When I start a VPN-session my server looses internet access. The server is host for a few virtual machines and they have internet access.using 5505 and asa is version 8.4(2).The nat-setup is like this:3 (inside) to (outside) source static any any   d...

I's like to map an Internal IP to an External IP. I have the Following code:object network myserver_o host 192.168.1.40object network myserver_i host 10.1.0.40object network myserver_i nat (hbg-inside,hbg-outside-192) static myserver_oWhen I look a...

I have an ASA5505 with the base license and need to create a fully functional DMZ and 15 SSL connections. I know I need to purchase the Sec+ license but am unsure on what to buy for the SSLs.Can I purchase 2 ASA5505-SSL10-K9 to achieve 20 SSL or do I...

Hi, we installed the latest signature db on the appliance. When we test signature1466/0 the signature does not fire. The exploit is running on a test webserver.Why does it not work?Regards Marc