Network Security

We have ASA used for SSL and IPSEC remote access with shared license, one license server and no backup.  We plan to go from 8.2.5 to 8.4.1  It appears i need to go to 8,3.x first is this correct?  The other questions is which do we do first, the ASA ...

Hello Guys,I have 3-VLANs on my cisco switch:  VLAN1- 192.168.2.2VLAN2- 192.168.10.2VLAN3- 192.168.11.2i hv conected my switch --to-- ASA5510 inside int which is in vlan1 . my asa inside int ip is : 192.168.2.1      . so now i want know how to route ...

I have 2 outside connections one of which works as a backup connection. I am trying to setup SLA monitor so that when primary fails, the secondary connection takes over. However I never get connected to the primary connection after reboot, the backup...

Hi all,Overview/FactsFirewall: ASASecurity Level:Outside - 0DMZ - 10Inside - 100Access Rules in Question (ALL INCOMING):Outside - implicit any | any | IP | DENYDMZ - implicit any | any | IP | PERMITInside - implicit any | any | IP | PERMITSituation/C...

Hi all,i`ve setup smart tunnel with different applications. (mstsc.exe, putty.exe). This works fine. I`ve now tried to add the vSphere client appliaction (VpxClient.exe). But i don`t get it working.My question now: Has somebody get it working or is t...

ok real simple Im sure.I have allowed an object-group to access outside interfaces of some international devices for monitoring up status.  I know the object-group works because I'm able to monitor other IPs.  Lets say the host in question in this gr...

Hi, I have an issue, on my Active/Stanby ASA5505 has Sec+ License(trial), I can't create more then 3 nameif interface however,Licensed features for this platform:Maximum Physical Interfaces       : 8              perpetualVLANs                       ...

HelloI find plenty of examples of host configurations, like...static (dmz,inside) X.X.X.X Y.Y.Y.Y netmask 255.255.255.255 dnsCan I also configure it for networks, like...static (dmz,inside) X.X.X.X Y.Y.Y.Y netmask 255.255.255.0 dnsThe reason to deplo...

Hi,I have a cluster of Cisco ASA, and the exit to Internet is via two connections (one for each FW) with two routers configured in HSRP for redundancy. Currently one of these routers is the active HSRP, so all outgoing traffic goes through one of thi...

HolaTengo un router linksys rv042 con varias pc xp conectadas y todas navegan. Ahora bien tengo dos maquinas con windows vista que no se conectan si esta el firewall activado. y no tengo reglas puestas sobre estas maquinas. No sabes si tengo alguna i...

Just got a new ASA and is prepping it before throwing it out live.But i cant seem to get the forwarding to function properly.I have followed http://www.gregledet.net/?p=529  and read to numerous topics but i cant seem to figure outwhy it aint working...