Network Security

I am currently using g0/3 for failover between my two ASA5520's.  I would like to move that to the management interface to free up g0/3 for a second DMZ segment.  are there any implications to doing this live other than i would only have a single ASA...

Hi,The syslogs from ASA and FWSM are a nightmare, since source/destionation are always different under some circumstances and even the ASDM shows wrong info.C is client which is the source of all activityS is server which is always the destinationFWS...

Considering using the SSM-20 modules in our 5520's configured in an Active/Standby configuration.  I have a question.. in 8.3 cisco did away with the need to have duplicate licenses for things like SSL VPN, is the same true for the SSM-20 signature f...

I have this error in the ASA log each time the Botnet traffic filter tries to fecht the botnet database:%ASA-3-338307: Failed to decrypt downloaded dynamic filter data fileWhat does it mean? What can i do?Thanks

There are 2x Cisco ASA 5505 in an active/standby failover config.  The primary asa 5505 has been reset and the secondary is now running as active.  I would like to reintroduce the primary again but need to know how to do this.Ideally I would like to ...

Why when I try to reset Cisco ASA 5505 by pressing  the button behind the hardware nothing happen? Just via software I can reset it? I bought the hardware an year ago and I've never used, the problem that I don't have the blue cable and via software ...

Hi, I have been given the task to upgrade the ASA from 8.04 and 6.1 to the latest and greates versions.But I read that NAT has changed in 8.3 onwards - below is my part of my current setup, how would the syntax work once I upgradeThanks for any helpa...

Hello. I have been for couple of days, reading, google in and yet i have not found this configuration to work:Squid 3.1Cisco ASA 5540 8.2(3)Squid Conf:http_port 8080 transparentwccp2_router {internal-ASA-IP}wccp2_service standard 0 password=123Squid ...

Hi all,I've deployed NAC in L2 OOB VG mode with ADSSO and I'm trying to use the OOB logoff feature but it's not working. The VLAN change detect feature doesn't work either (I think the two problems might be related).It will work if each user role is ...

Hi, Can anyone help me, I have an asa5520 and just suddenly I start having high CPU utilization and I have done all the changes which expected such as disabling the logging, and all these first steps, but still I receive high CPU reaching 35% which m...

I have been doing packet captures on High and Medium events and in the IME there is no obvious way to delete old captures. They don't take up alot space but I wanted to know if there is a way to view the disk capacity on the IPS and how I can delete ...