Network Security

Engage with peers and experts on network security topics such as FTD, FMC, FDM, CDO and ASA.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

Resolved! ASA policing issue

Dear friends,There is a requirement for a wireless guest subnet to be policed to 600 kbps while sending traffic to Internet.The wireless guest subnet is 172.20.50.0/24 and is connected to inside interface of ASA.A point to note is that this subnet is...

Resolved! identity nat

a subsidaries firewall  is configured with few static , nat lines.int vlan132nameif Pinnaclesecurity-level 65ip address 141.18.65.11 255.255.255.0 standby 141.18.65.21int vlan138 nameif serenasecurity-level 53ip address 141.18.53.11 255.255.255.0 sta...

suthomas1 by Level 6
  • 540 Views
  • 6 replies
  • 0 Helpful votes

I have an ASA5520 running IOS 8.0(4) in routed mode, single context with a security license to support 3DES and 750 VPN users.:I setup an L2L IPsec VPN tunnel between this ASA and a Cisco router running 15.x.On the router, I specified transport mode....

fsebera by Level 4
  • 463 Views
  • 5 replies
  • 0 Helpful votes

All,I have a ton of entries getting logged to my syslog server, but the problem is that I need the particular message that's being logged.firewall :  TCP access denied by ACL from 10.x.x.128/1438 to INSIDE:10.x.x.x/80I'm not seeing a way of doing thi...

Resolved! ACL question

Hello all,I have an ACL applied to line vty 0 4 on a router my ACL has number 11My question is: if I add new rule to my ACL 11 should I apply access list to line vrty 0 4 after new rule has been added?like ip access group 11 in  ?I appreciate your an...

rouzbehta by Level 1
  • 616 Views
  • 2 replies
  • 0 Helpful votes

I have a issue with TACACS+ authentication with ASA. the following AAA configurations of ASA are:aaa-server TACACS+ protocol tacacs+aaa-server TACACS+ (outside) host x.x.x.x timeout 1 key aaaaaaaaaa authentication ssh console TACACS+ LOCALaaa authent...

Hi,Does anyone know how CSA licensing work? I understand that a licence is assigned when aa client agent becomes active but how can I revoke licences assigned to hosts those are no longer active on the network e.g decommissioned machines etc.Are lice...

Hi allWe have a cluster ASA Active/Passive with 8.3 version and only an username configured (root):username root password mV1/6OvaVKyBDO6f encrypted privilege 15username root attributes service-type adminWhen the customer issues the 'enable' command ...