Hi,I have Cisco ASA and i have connected Exchange 2007 Edge Server in DMZ and Client Acces Server in Local Network. Can anyone please tell me how to configure the ASA for this?Thanks,
Hello,I need to create a separate internal network for a classroom inside our existing lan. Topology is as follows:separate lan - 3560 - trunk - 3560 - asa5520 - internetMy requirements are;The separate lan will need one public ip for about 30 hosts...
hello out thereI sit and wonder about how much I can push through an ASA5510 - HTTP traffic - ftp and everything else is running so close to "wire speed" as can be expected.I downloaded a "Test Module" from Ookla (www.ookla.com) - it is the same as u...
hi folksI wanna let some users access outside application through the firewall,so what is the proper config for that?inside (sec 100)outside (sec 0)so will the access-group applyed in direction on the outside or out direction on the inside interf...
HelloI want to publish servers on the outside interface of an ASA 5510 with 8.3(2). I does not work for me! I can put them on a own ip but not the interface. The logs say "Denied by ACL" but no ACLs are incremented and show nat does not show any hits...
Strange issue this,I have a flickr upload tool, when using direct through our ASA5510, upalds are fine.The problem is when the request comes via our proxy using ISA2000 it never works (my pc > proxy > asa). Watching the logs, the destination port see...
hii am confused if we arehaving a public ip 199.X.X.11 of inside server given to its nic and is behind asa inside and asa external range doesnot fall into that will i be able to access this server from outside .the access list is applied on the outsi...
Hi, I'm a bit confused with the new ASA versions Cisco has published (8.3 and 8.4).What is supposed 8.2 users have to do?Cisco is not going to evolve 8.2 anymore? making it a must migrate to the new concept of NAT? or 8.2 with standard NAT will conti...
Dear all,When I log on to the IPS module of my ASA, i see many signatures with with risk rating of HIGH but they are not activated(ENABLED). I dould if it is advisable to activate all those signatures with risk rating of HIGH in the IPS. I believe if...
Hi ,I have ASA 5505 with base license and IOS version is 7.2(4). I configured both site to site vpn and Remote Access VPN. Site to Site VPN is working fine and also Remote access vpn tunnel came up, remote user got IP address from the firewall. But...
Dear All,I have ASA 5505 with base license and IOS version is 7.2(4). I configured both site to site vpn and Remote Access VPN. Site to Site VPN is working fine and also Remote access vpn tunnel came up, remote user got IP address from the firewall....
IDS 4215 software version 5.0 not connect with IVE and IME server."IOException when try to get certificate: java.security.cert.CertificateExpiredException". error message appears. How this can be resolved?
Hi, I try to setup SSO on Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit, but I can't start Active Directory SSO Service that show error follow below. I saw this error " KDC has no support for encryption type (14)" . Could anyone help me ...
