Network Security

The https certificate of one of our pix firewalls has expired, so I wondered how to refresh it.I tried everything from generating new key pairs to zeroizing every key I could grab and generate new ones, disabling and enabling the http server in betwe...

we have a backup inet connection that i had an old netgear firewall on.A pix506e free'd up recently so i thought i would put that on the rogers cable connection as it was alot more stable than the netgear one i was using.I reset to factory defaults o...

I am working on a project in which i have to remove a PIX 515E and have to connect an ASA 5510, i have copied all the commands from PIX to ASA except the conduit commandsfollowing are the examples of the conduit commands i haveconduit permit tcp obje...

Hi.. We are having FWSM between aAvaya voip phone and call manager server. We are using NAT and access lists for allowing the traffic. Our calls rings both ways but not able to hear the voice. Our observation is as below :When the IP telephony handse...

Hi, excuse me I am new to NAC. Have to manage a remote /21. Cannot split more but last subnet of group must bypass NAC, keeping integrity of GW, route and /21. How can I setup this?ThanksA

Hi All,Can anyone maybe explain to me the concept that--Why naming is required in ASA like inside, outside, public, Private and dmz etc  ?  Is it possible to configure asa without assign any name to its interface?Regards,Saurabh

Hi Folks,does anyone knows about how can I convert a script from IPTABLES to Cisco ASA?thanks a lot

I am trying to run syslog reports in LMS.  When I run the 24 hour syslog report nothing is found.  No data on the report.  I am trying to troubleshoot this.  How can I  tell if my traps are getting to the Ciscoworks server (10.223.241.32)?  Is there ...

two 5520 in fail-over configurationsoftware version 8.2(2) device manager version 6.2(5)53Creating vpn tunnels to basically identical devices has not worked reliably and im guessing that something is incorrect with the nat(0) statement.  So decided t...