I am trying to get my two IDSM's to use NTP from my Core switch and keep getting the following error.Error: Cannot connect to NTP server or NTP server is not runningError: Strata too high - too many indirections from sensor to master NTP server
I need suggestions on how to design an ASA 5520 Active/Standby solution. Current configuration:T1 coming in from ISP to patch panel (Disaster Recovery site that also hosts our webservers)T1 -> ASA -> L3 Switches -> ServersProposed configuration:T1 co...
Hi all,I am very new to Cisco, and routing/ firewalls in general.I brought my self a Cisco 1812. Its connected via Fe/0 to an ADSL modem in pure bridge mode. So the 1812 is doing all the PPP auth.I've been following this guide Zone-Based Policy Firew...
I would like to intercept all http and https traffic at the external interface on an ASA 5510 and forward it to a single server on the internal interface. I thought I could do this with static entries, but I seem to be able to only do 1 entry per se...
On of our customers is asking us to set up a port forward from port 587 to port 26 because his client uses verizion for their mail server. What is the best way to set this up?
Does anyone know if the NAC appliance supports EV SSL certs; especially version v4.7.x.Any insight into older versions (4.1.3 and higher) for compatibility would be appreciated. Thanks!ben
HiI've been tasked with removing user accounts from the asa 5520 by the Sr.Network Engineer but he told me that there is CL that i can use to decrypt the user account passwords in the config.Can anyone by chance tell me what is the command that he is...
Hi Guys,Can anyone please help me to know what all signatures are included in atomic ip engine?Please help me to know where can i find a list of all the signatures that comes under atomic ip engine?Thanks and regards,Mithun
Hi everybody hope u r doing find,please I want to block user from using yahoo messenger and live messenger; for that I have an ASA 5510 like perimeter equipment, all internet trafic passing through this ASA; in the same time, I also want to block int...
Hi ,I am trying to get Passive Mode FTP working through our Firewall and for some reason we can only get Active Mode FTP to work !!!We can only access the internal Host web1 on active mode ftp sessions !!I have the followiong rules/policies setup and...
Hi,I updated CAM and CAS servers to ver 4.7.2, in OOB mode on windows 7 don't work autorization whith ADSSO.ktpass make by win 2008 r2ver nacagent 4.7.2
Hi,I got a Cisco 877W set up and have problems with the Firewall setup using Cisco Configuration Professional.I am new to the security field so I decided to use CCP to configure the firewall. I would like to block all traffic from the internet and al...
I'm a student at Georgia Southern University. I use a Lenovo X200 Tablet with Windows 7 Ultimate 32-bit. Up until last week I had no trouble with NAC agent logging into my university's network. Since last monday or so, when I log in it says I have...
guys a very basic question we have pix firewall and it has many interfaces DMZ......now one of the interface is conected to a core swicth 4500 and on 4500 we have few test servers ....the link which conects from swicth to firewall is ethernet 1 ad ac...
Hi,Could someone guide me how can I filter the OSPF routes in cisco ASA inside interface. I want only my private network be part of OSPF configured on ASA. But I am getting other routes too from external networks. Pls. suggest.Thanks,
