Network Security

Hello,We're desinging a Network, for which I need some expert advise on.We need to build two tunnels from a Remote ASA, to a Hub ASA, and a VPN Concentrator (for redundancy). Basically, we're thinking of doing an L2L VPN between the two ASAs and a Re...

Hello,Im seeing a Huge amount of events related with the signature ARP Reply-to-Broadcast 7102.The sensor saw an ARP Reply packet with its payload Destination MAC containing a broadcast address. This is not normal traffic and can indicate an ARP pois...

Currently I've been working on the configuration of several IOS Zone-based Firewall (over ISR2801 with IOS 12..4(15)T12) and I've read about the features and limits of the Self-zone for the router outbound and inbound traffic. I really prefer use the...

Hi all,I was wondering if someone could help me out with a issue I have.  At present our corporation has all internet traffic routed via our HQ, through a Cisco ASA 5510 arrangement.  I need to prevent client machines (subnet / range) going directly ...

I work at a small to medium sized business, where we have a Firewall (Cisco ASA 5510), an IPS System (Cisco IDM), and A Cisco MARS device. Is it neccessary to have all 3?Thanks

can any one tell me which ram is used in Cisco ASA is it a special RAM or normal DDR. if possible tell me the specification is ASA 5520 RAM

Cisco famously quotes max firewall throughput specs on all ASA models, but how do you tell if your firewall is reaching this maximum throughput? For example, there is a 300Mbps max throughput number on the asa 5510 in the spec sheet. How do I know if...

Can someone direct me to the part numbers for the support of the IPS module? Particularly, the software upgrades and signature upgrades?  Do I need a separate contract for the module itself or is that covered by the ASA contract?  thx atgain.

I've been given a handful of 4240s and ssm-10's to install and configure but know nothing about them. I connected up a 4240 and managed to do basic things like upgrade it with the latest pkg and get it to do signature auto-updates. I also associated ...

Hi,a customer want a user which has view-only rights on his catalyst switches. I created a user whit privilige level 7.If you log into the CLI everything is fine. But by trying to log into the web page the system wants a level 15 user.Is their any po...