Network Security

Engage with peers and experts on network security topics such as FTD, FMC, FDM, CDO and ASA.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

My customer has a PIX 515 HA, version unknwon.  We need to do password recovery.  Am I right in saying that the following sequence will work?Reboot standby, determine SW version from consoleVerify standby is operational after rebootDownload correct u...

mflanigan by Level 1
  • 463 Views
  • 2 replies
  • 0 Helpful votes

Hi,Just finished researching on options concerning the aip-ssm 20 module and am now at a dead end.  I understand that there is no option for syslog, email alerts.  SNMP apparently is only for critical-device related alerts.  The thing is i am despera...

I have a FWSM with context in way routed, I want to know if I obtain to inspect a field TCP of one determined application that works in door 3000?The problem is that I have an application that works with VPN for some customers and without VPN for ano...

dreis by Level 1
  • 258 Views
  • 1 replies
  • 0 Helpful votes

I configured my ASA 5510, please find attached my network diagram for reference, and following configurationPleaase review my configuration and advise what should be denied and what should be permitted,moreover please check basic security levels are ...

junshah22 by Level 1
  • 2136 Views
  • 6 replies
  • 0 Helpful votes

dear experts, helloi'd like to ask you if we have two subnets each connected to a specific ethenet interface on the ASAfor example:10.0.0.0/24 connected to E0/1and10.0.1.0/24 connected to E0/2the question is: if i want to let the hosts of subnet 10.0...

hanyawad by Level 1
  • 360 Views
  • 1 replies
  • 0 Helpful votes

I saw this message in my CAM: Warning: Current and entity certificate has expired or is due to expire in less than 30 daysI know this is due to SSL certificate is ready to expire.. but i want to know what is the result if the certifcate expried after...

I just setup a new Cisco ASA 5510 with the help of the wonderful support staff at Cisco.  My setup is as basic as they come:  on a t1 going to my firewall then my layer 2 switches to my lan.  I need to allow traffic for my exchange server, RRAS serve...

Hi,We have a client who nats his public IP  (static nat) located on the outside to an HTTP Proxy for users to access Internet. Now when he try's to ssh from outside to manage this 5520 ASA he is never successful since the outside interface is natted ...

mo shea by Level 1
  • 1847 Views
  • 7 replies
  • 0 Helpful votes
Review Cisco Networking products for a $25 gift card