Hi Guys,does anyone know if is in roadmap the support for Windows 7 OS for IME? Actually is supported only in WinXP and Vista.Best regardsGabriele
Hi Guys,does anyone know if is in roadmap the support for Windows 7 OS for IME? Actually is supported only in WinXP and Vista.Best regardsGabriele
Recently, I have a question when I prepare a case which implement firewall (such as CBAC or ZBF), normal ACL, QoS, IPS and IPSec in a single router, for example, on a particular interface for ingress traffic, how will router process the traffic ac...
HiI really need someones help with this I am a bit stumped.We recently purchased a new internet link. The ISP has provided their own equipment which we dont have access to.On this equipment they have created two Vlans. One for internet traffic and on...
HelloIt is my first post here, so sorry if I'll mess up something.I have rather simple thing, but I've lost hours trying to implement it on FWSM.I need to configure NAT on destination IP address only for requests coming from outside.The packet which ...
Hi all, Good day to the Cisco Support Community AKA Netpro . I am not so sure where to post my question because it spans of two major topics. One is webhosting and the other one is NAT-ing. You see we have a problem, currently, we have a Pix 515E...
I have two connections to one ISP (one is over Radio channel the other is on-ground) who provides me with pool of public IP addresses. On my border routers (3825) I have BGP which announces this pool of addresses via one or another router (depending ...
We are going to install two ASA 5520 boxes with HA ( Active-Active or Active-Passive )The boxes include 50 context licenses(virtual Firewalls) and SSL VPN licenses 750 Nos. each. IS it impossible to use VPNs and contexts licenses with HA?
Hello experts,Can any body suggest me if i upgrade my image from 7.2 to 8.2 does all the services like ssl vpn, ipsec vpn client will work automatically or i need any thing more.Currently my ASA is having the follwoing info in flash:securedesktop-asa...
Hi,ASA 5540 has 4 gigabit and 1 FE ports. ( most likely it is management - correct me if I am worng ). If we need three interfaces inside,outside and DMZ we are left with only one gigabit interface.if we need to configure failover in stateful mode we...
Hi,I'm really new to using a firewall, and need some help.I have a leased PIX 501.When I had this added to my server, my PHP includes on my website that use the URL <?php include ('http://www.mydomain.com/footer.php');?>those files show up as not fo...
We are currently using CSA 5.2 and I'm trying to figure out a way to log whenever a user attempts to use removable media on the network. Specifically, USB flash drives. I know there is already a data theft prevention module that protects sensitive da...
Hi,I think this is a very simple problem but I don't see what's happening...I have an SA 540 allowing Internet access. The internal machines use an internal DNS server to get out to the Internet.Everything works fine.The problem is when I enabled Con...
Hello all,I am trying to setup an NAT exmption between two DMZ specific IP's on two ASA's, both with DMZ Interfaces but when I do Packet Tracer it fails on a Dynamic NAT statement we have setup. Here's the relevant config of one of the ASA's (the oth...
Hi everyoneI have a tftp server on my local network and devices based on remote sites. Between the two networks I have a firewall, ASA 7.2(4), routers and a MPLS VPN network. When the devices try to pull the image from the tftp server, the connection...
Hi,This is a strange situation.I cannot open some web pages on the Internet through the ASA. If I bypass the ASA I can open all the pages.There's no HTTP inspection on the ASA enabled.I am attaching the configuration.I am attaching a capture I did on...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-26-2024 02:14 AM | ||
04-22-2024 06:41 AM | ||
04-21-2024 09:36 PM | ||
04-17-2024 12:36 PM | ||
04-17-2024 07:38 AM |
User | Count |
---|---|
10 | |
6 | |
4 | |
3 | |
3 |