Network Security

Hi,I was wondering if there is a PIX/ASA simulator I can buy, I'm always having to change and test things on our ASA's and Pix's I woudl rather do it on a test system first to see if my changes would work before doing them on live systems?Thanks

Hi all:Executing a Vulnerability Assessment in an ASA 5510, it has detected a "SSL / TLS Renegotiation Handshakes MiTM Plaintext Data Injection". As a recommendation, it suggest to contact the supplier to find any patch. As of now, we couldn't find a...

Hi,I have ASA 5510 v.8.2(1) which automatically rebooted. In crashinfo I don`t see anything helpfull.I attached crashinfo file.What could be the cause and how can I troubleshoot it?

Hi all,i have a problem with "ip verify reverse-path interface inside".We have a very restricted admin-network, where we have the admin-interfaces of several servers, firewalls and other networkstuff. The perimeter firewall to the outside (asa5580 8....

Is it possible to copy the IPS event log files to a server from a Cisco IPS 4215 device?

Hello,I have an ASA5510 connected to an external vendor on the outside inf, and to my mpls network on the inside inf.  It's running in L2 mode, and not blocking anything right yet.  My routers, switch, ASA, and vendor switch are all in the same sub-n...

Hello CCIEs or not,2821 ISR IOS Firewall 12.4(24)T2 is connected to a second ISP through Vlan304 and cable router I added nat inside source route-maps in order to nat in each ISP addressing subnetsProblem is that inside FTP clients successfully conne...

I have a setup where there are 2 x Cisco6509E Switches with FWSM and IDSM.I am trying to Loab Balance traffic to the 2 x IDSM using Etherchannel and can only do this when both IDSMs are in a single chassis, I check some Cisco sites which highlighted ...

HiDoes anyone knows how to setup the IPS4200 Series to automatically backup or even manually?